FAQs

FREQUENTLY ASKED QUESTIONS

Once you release the arrow it is out of your control, anything can (and sometimes does) happen. Every aspect of the Valkyrie Arrow System is designed to give you the greatest accuracy and lethality in the widest variety of hunting situations and impacts. In essence, using our arrow system will give you the best chance of success when conditions are tough and/or things don’t go perfectly.

Here are some of the most common questions about the Valkyrie Archery arrow builds and broadheads.

What are the most common arrow setups?

For 70-Pound bows, a 28” Arrow will fall between 475-500gr and 19-20%FOC
For 60-Pound bows, a 28” Arrow will be 445-475gr and 19-20%FOC
This is with black Aluminum Centerpin sleeves and 180-200gr heads.

What is the Centerpin System and what makes it better?

The Centerpin System consists of 2 parts, a Centerpin Sleeve, and a Centerpin head. The Centerpin sleeve (outsert) glues permanently over the front end of the shaft (approx. 3/4”-1” depending on the model). The Centerpin heads all have the Centerpins built-in, they slide down inside the sleeve/shaft (approx. 2” depending on model) and screw into the sleeve. This combination fortifies the front end, and helps maintain concentricity of broadheads with the axis of the shafting. For Micro Diameter shafting, the Centerpin System is the simplest, strongest, most accurate screw-in system available. (Watch the Centerpin video)

Can I use the Centerpin sleeves and heads on other shafting?

Yes, the Centerpin System is designed for almost all Micro Diameter shafting with an Inside Dia. of .165”-.167”, and outside diameters up to .256”. Examples: Victory VAP(all series), BlackEagle (ximpact, deep impact, instinct), GoldTip pierce(all), Easton pro comp, injexion, 4mm. Element storm.

Can I use other broadheads with the Centerpin sleeves?

No, the Centerpin sleeves only accept Centerpin heads, they are not compatible with the standard screw-in heads. It is a completely modernized screw-in system for the new micro diameter shafting.

Why are your heads so heavy?

Our broadhead is designed for zero impact failure (no bending or breaking on heavy bone impacts) and creating an 18%+ forward of center (FOC) arrow. (see video) No more stuffing idle weight inside your arrow, our head and component designs make the additional weight work for you, it not only increases your FOC and mass weight but with the Centerpin heads the extra weight actually makes your front end stronger. Building heads with thicker blades and tough ferrules also means head longevity, they will last you many seasons.(as long as you don’t lose them!)